RECORDING
Recording in standby mode (SCART SET setting)
When SCART SET is set to “ON”, signals can pass through this unit’s SCART connectors even if this unit is in the standby mode. This allows you to record between the connected external components (see page 45).
If you experience difficulties recording through this unit’s SCART connectors, do the following to make sure SCART SET is set to “ON”.
■To change the SCART SET setting
1Press AMP, then press SET MENU on the remote control.
AMP | MENU |
then
SET MENU
2Press 
/ 
to select MANUAL SETUP, then press ENTER.
SET MENU
. ;BASIC
. ;MANUAL
p | p |
4Press 
/ 
repeatedly to select SCART SET, then press ENTER.
3 OPTION MENU
C)PARAM.
.
p | p |
5 Press 
or 
to select ON, then press ENTER to complete the setting and return to
OPTION MENU.
Signals can pass through this unit via a SCART cable whether it is turned on or set to the standby mode.
y
To stop signals on the SCART bus from passing though this unit when it is in standby mode, select “OFF” in step 5.
OPERATION | BASIC |
|
|
3 Press 
/ 
repeatedly to select OPTION MENU, then press ENTER.
;MANUAL SETUP
. 1 SOUND MENU
.
p | p |
English
29
