Dynamic range F)DYNAMIC RANGE

Use to select the amount of dynamic range compression to be applied to your speakers or headphones. This setting is effective only when the unit is decoding Dolby Digital and DTS signals.

Choices: MIN (minimum), STD (standard), MAX (maximum)

F)DYNAMIC RANGE

.)MAX )MAX

p

p

Speaker SP

Select to adjust the speaker compression.

Headphone HP

Select to adjust the headphone compression.

Select MIN if you regularly listen at low volume levels.

Select STD for general use.

Select MAX to preserve the greatest amount of dynamic range.

Audio set G)AUDIO SET

Use to customize this units overall audio settings.

G)AUDIO SET

.;;MUTE ;;0ms

p

p

Audio mute AUDIO MUTE

Use to adjust how much the mute function reduces the output volume.

Choices: MUTE, –20 dB

Select MUTE to completely halt all output of sound.

Select –20 dB to reduce the current volume by 20 dB.

Audio delay AUDIO DELAY

Use to delay the sound output and synchronize it with the video image. This may be necessary when using certain LCD monitors or projectors.

Choices: 0 to 160 ms

SET MENU

2 INPUT MENU

Use this menu to manually adjust any input setting.

2 INPUT MENU

.

p

p

Input assignment A)INPUT ASSIGN

You can assign jacks according to the component to be used if this unit’s initial settings do not correspond to your needs. Change the following parameters to reassign the respective jacks and effectively connect more components. Once the inputs have been reassigned, you can select the corresponding component by using INPUT on the front panel or the input selector buttons on the remote control.

For OPTICAL INPUT jacks 1 and 2

Choices: DVD/CD, VIDEO1, VCR, DTV/CBL

OPTICAL IN

. ;;;;; DVD/CD

(DVD/CD

(2);;;;;DTV/CBL

)

Note

OPTICAL IN(2) cannot be assigned to an item already set to OPTICAL IN(1). If you want to assign OPTICAL IN(2), change the selection for OPTICAL IN(1). If the above settings are incorrect, “– – –” appears in the display.

For COAXIAL INPUT jack 3

Choices: VIDEO1, VCR, DTV/CBL, DVD/CD

COAXIAL IN

. ;;;;; VIDEO1 ( VIDEO1 )

Note

COAXIAL IN(3) cannot be assigned to an item already set to OPTICAL IN(1) or OPTICAL IN(2). If you want to assign COAXIAL IN(3), change the selection for OPTICAL IN(1) or OPTICAL IN(2). If the above settings are incorrect, “– – –” appears in the display.

OPERATION

ADVANCED

 

 

English

43

Page 45
Image 45
Yamaha RX-SL80 owner manual Fdynamic Range, Gaudio SET, Input Menu, Optical, Coaxial