CONNECTIONS
Before connecting components
CAUTION
Do not connect this unit or other components to the mains power until all connections between components are complete.
•Make sure that all connections are made correctly - that is to say, L (left) to L, R (right) to R, “+” to “+” and
•After you have completed all connections, check them again to make sure they are correct.
•The jack names correspond to the names on the input selector.
■Signal directions and cable indications
audio signal direction
video signal direction
Notes
•This unit handles digital and analog signals independently. Thus audio signals input to the digital (OPTICAL or COAXIAL) jacks are not output to the analog VCR OUT (REC) jacks.
•The OPTICAL jacks on this unit conform to the EIA standard. If you use a fiber optic cable that does not conform to this standard, this unit may not function properly.
Dust protection cap
Pull out the cap from the optical jack before you connect the fiber optic cable. Do not discard the cap. When you are not using the optical jack, be sure to put the cap back in place. This cap protects the jack from dust.
■VIDEO 2 jacks (on the front panel)
Use these jacks to connect any video source, such as a game console or video camera, to this unit.
For analog signals |
|
left analog cables | L |
right analog cables | R |
For digital signals |
|
optical cables | O |
coaxial cables | C |
For video signals |
|
video cables | V |
| S |
■Analog jacks
You can input analog signals from audio components by connecting audio pin cable to the analog jacks on this unit. Connect red plugs to the right jacks and white plugs to the left jacks.
■Digital jacks
This unit has digital jacks for direct transmission of digital signals through either coaxial or fiber optic cables. You can use the digital jacks to input PCM, Dolby Digital and DTS bitstreams. All digital input jacks are compatible with
VIDEO | L AUDIO R | OPTICAL |
VIDEO 2
V L R O
Optical out
Audio out R
Audio out L
Video out
Game
console or
video
camera
12
