CONTROLS AND FUNCTIONS
DSET MENU
Turns the SET MENU on or off.
EMulti control section
Use to select and adjust DSP program parameters or SET MENU items.
FVOLUME +/–
Increases or decreases the volume level.
GInput selector buttons
Use to select the input source and change the control area.
■U.K. and Europe models only
HRDS tuning buttons
FREQ/RDS
Press this button when the unit is receiving an RDS station to cycle the display between the PS mode, PTY mode, RT mode, CT mode (if the station offers those RDS data service) and/or the frequency display.
PTY SEEK MODE
Press this button to set the unit to the PTY SEEK mode.
PTY SEEK START
Press this button to begin searching for a station after the desired program type has been selected in the PTY SEEK mode.
EON
Press this button to select a radio program type (NEWS, INFO, AFFAIRS, SPORT) to tune in automatically.
Using the remote control
30 | 30 | Approximately 6 m (20 ft) |
|
The remote control transmits a directional infrared beam. Be sure to aim the remote control directly at the remote control sensor on the main unit during operation.
■Handling the remote control
•Do not spill water or other liquids on the remote control.
•Do not drop the remote control.
•Do not leave or store the remote control in the following types of conditions:
–high humidity such as near a bath
–high temperature such as near a heater or stove
–extremely low temperature
–dusty places
6
