Brother HE 120 Maintenance, DRemove the shuttle, Grasp the shuttle, and then pull it out

SE-BrotherE_sgml.book Page 163 Monday, June 30, 2003 3:44 PM

————————————————————————————————————————————————————

dRemove the shuttle.

Grasp the shuttle, and then pull it out.

1

aShuttle

eUse the cleaning brush or a vacuum cleaner to remove any lint and dust from the race and its surrounding area.

1

2

aCleaning brush b Shuttle race

• Do not apply oil to the shuttle.

fInsert the shuttle so that the projection on the shuttle aligns with the spring.

1

2

2

1

aProjection

b Spring

1

aShuttle

gInsert the tabs on the needle plate cover into the needle plate, and then slide the cover back on.

CAUTION

●Never use a shuttle that is scratched, otherwise the upper thread may become tangled, the needle may break or sewing performance may suffer. For a new shuttle (part code: XC3153-051), contact your nearest authorized service center.

●Be sure that the shuttle is correctly installed, otherwise the needle may break.

5

Maintenance 163