Brother HE 120 operation manual Attaching the embroidery foot, BTurn off the sewing machine

SE-BrotherE_sgml.book Page 131 Monday, June 30, 2003 3:44 PM

————————————————————————————————————————————————————

Attaching the embroidery foot

Attachment of the embroidery foot is explained here.

Attaching the embroidery foot

Attach the embroidery foot when embroidering. Have the included embroidery foot "Q" and a screwdriver ready.

1

2

aEmbroidery foot bar

bCaught by the presser foot holder

CAUTION

●Always use the embroidery foot "Q" when embroidering. If the wrong presser foot is used, the needle may hit the presser foot and break or bend.

aPress (Needle position button) once or twice to raise the needle.

1

aThe needle goes up.

bTurn off the sewing machine.

CAUTION

●Before replacing the presser foot, be sure to turn off the sewing machine, otherwise injuries may occur if the start/stop button is accidentary pressed and the machine starts sewing.

cRaise the presser foot lever.

4

1

XThe presser foot is raised.

•At the time of purchase, the presser foot lever is up.

dPress and hold the black button on the back of the presser foot holder to release it.

1

2

aBlack button

bPresser foot holder

XDetach the presser foot from the presser foot holder.

Attaching the embroidery foot 131