Brother HE 120 operation manual Using the thread cutter, Needle is raised

SE-BrotherE_sgml.book Page 53 Monday, June 30, 2003 3:44 PM

————————————————————————————————————————————————————

Memo

zThe machine can be set so that the threads will be cut when sewing is finished. For details on setting the machine so that the threads are cut automatically, refer to "Auto- matically cutting the thread" (page 60).

■Using the thread cutter

When sewing with thread thicker than #30, nylon or metallic threads, or other special threads, use the thread cutter on the side of the machine to cut the threads.

aWhen you wish to finish the stitching and the

sewing machine is stopped, press (Needle position button) once.

1

aNeedle position button

XThe needle is raised.

bRaise the presser foot lever.

cPull the fabric to the left side of the machine, and then pass the threads through the thread cutter to cut them.

1

2

aThread cutter

1

aPresser foot lever

Sewing 53