Brother HE 120 operation manual Attaching the embroidery frame, 142, BRaise the presser foot lever

SE-BrotherE_sgml.book Page 142 Monday, June 30, 2003 3:44 PM

EMBROIDERY —————————————————————————————————————————————

Attaching the embroidery frame

The embroidery frame with the stretched fabric is attached to the embroidery unit.

Attaching the embroidery frame

aWind the embroidery bobbin thread onto the bobbin and set it into the shuttle.

•For details, refer to "Winding/Installing the Bobbin" (page 18).

bRaise the presser foot lever.

1

aPresser foot lever

cPass the embroidery frame under the presser foot while raising the presser foot lever even further.

CAUTION

●Do not hit the needle with your finger or the embroidery frame. It could result in injury or the breaking of the needle.

dFirmly insert the embroidery frame guide into the embroidery carriage frame holder from the top.

Line up the embroidery frame guide tabs and the embroidery carriage frame holder slots and push in until it clicks and stops.

1

2

aEmbroidery frame guide tabs

bEmbroidery carriage frame holder slots

XThe embroidery frame is attached.

CAUTION

●Correctly set the embroidery frame into the embroidery frame holder. If it is not set in correctly, the presser foot may hit the embroidery frame, resulting in injury.

142