Brother HE 120 operation manual Removing the presser foot holder, ARemove the presser foot

SE-BrotherE_sgml.book Page 42 Monday, June 30, 2003 3:44 PM

GETTING READY ————————————————————————————————————————————

Removing the presser foot holder

Remove the presser foot holder when cleaning the sewing machine or when installing a presser foot that does not use the presser foot holder, such as the embroidery foot and quilting foot. Use the screwdriver to remove the presser foot holder.

aRemove the presser foot.

•For details, refer to "Replacing the presser foot" (page 40).

bUseholderthescrew.screwdriver to loosen the presser foot

2

13

aScrewdriver

bPresser foot holder

cPresser foot holder screw

■Attaching the presser foot holder

aAlign the presser foot holder with the lower- left side of the presser bar.

bHold the presser foot holder in place with your right hand, and then tighten the screw using the screwdriver in your left hand.

1

aScrewdriver

Note

zIf the presser foot holder is not correctly installed, the thread tension will be incorrect.

42