Brother HE 120 Selecting Stitching, FSelect the stitch type, GPress the stitch selection

SE-BrotherE_sgml.book Page 73 Monday, June 30, 2003 3:44 PM

————————————————————————————————————————————————————

fSelect the stitch type.

XThe screen containing the various types of stitches appears.

•To select a different stitch type, press (Back key).

gPress the stitch selection.

(Previous page key) displays the previous

screen, and (Next page key) displays the next screen.

†When a decorative stitch is selected

2 1 4

5

6

3		7
	89

aAutomatic reverse/reinforcement stitch b Decorative stitch selection

c Set width and length

d Automatic thread cutting e Check combined pattern f Delete a selected pattern g Horizontal mirror image h Single stitch sewing

i Repeat sewing

•To select a different stitch, press the to remove a selected pattern.

hIf necessary, specify the setting for automatic reverse/reinforcement stitching and adjust the stitch length, etc.

•For details on sewing with each of the utility stitches, refer to the following pages.

Note

zWhen a stitch is selected, the icon for the presser foot that should be used appears in the screen. Check that the correct presser foot is attached before starting to sew. If the wrong presser foot is installed, turn off the sewing machine, attach the correct presser foot, and then select the desired stitch again.

Memo

zFor details on adjusting the stitch width and length, refer to "Adjusting the Stitch Width and Length" (page 56).

3

Selecting Stitching 73