Brother HE 120 operation manual Do not press the thread cutter button

SE-BrotherE_sgml.book Page 88 Monday, June 30, 2003 3:44 PM

UTILITY STITCHES ———————————————————————————————————————————

hStartSet thesewing.sewing speed controller to the left (so that the speed will be slow).

XThe sewing machine automatically stops after sewing reinforcement stitches.

• Do not press the thread cutter button.

iPull the upper thread at the end of the stitching to the wrong side of the fabric, and then tie it with the bobbin thread.

Use scissors to cut the upper thread and the bobbin thread at the beginning of the stitching.

jWhen you are finished attaching the button,

slide the drop feed lever to (to the right as seen from the rear of the machine) to raise the feed dogs.

Memo

zThe feed dog position switch is normally set to the right side.

zThe feed dogs come up when you start sewing again.

88