Brother HE 120 Close until it clicks, Follow arrow 2 indicated on the thread cassette

SE-BrotherE_sgml.book Page 26 Monday, June 30, 2003 3:44 PM

GETTING READY ————————————————————————————————————————————

CAUTION

●If the spool or the spool cap is not positioned correctly, the thread may become tangled around the spool pin or the needle may break.

hWhile holding the end of the thread with your right hand and the thread cassette with your left hand, close the cover.

Close until it clicks.

iPass the thread through the slit in the top of the thread cassette.

Follow arrow 2 indicated on the thread cassette.

jPull the thread to the left and pass it through the slit along the left side of the thread cassette.

Follow arrow 3 indicated on the thread cassette.

•When using special thread such as metallic thread, use the thumb of your left hand to lightly press down on the area indicated in the illustration to create an opening that allows for easier threading.

1

2

aPush b Gap

kPasscassette.the thread along the bottom of the thread Follow arrow 4 indicated on the thread cassette.

lPass the thread through the notch in the lower-right corner of the thread cassette, and then pull the thread to the left.

Follow arrow 5 indicated on the thread cassette.

1

a Notch

26