Brother HE 120 Blind Hem Stitching, If the needle catches too much of the hem fold

SE-BrotherE_sgml.book Page 81 Monday, June 30, 2003 3:44 PM

————————————————————————————————————————————————————

fAdjust the stitch width until the needle slightly catches the fold of the hem.

R

1

aNeedle drop point

When you change the needle drop point, raise the needle, and then change the stitch width.

1

aStitch width

■If the needle catches too much of the hem fold

The needle is too far to the left.

Press to decrease the stitch width so that the needle slightly catches the fold of the

hem.

■If the needle does not catch the hem fold The needle is too far to the right.

Press to increase the stitch width so that the needle slightly catches the fold of the

hem.

12

aWrong side of fabric b Right side of fabric

• For details, refer to "Adjusting the stitch	3
width" (page 56).

gSew with the fold of the hem against the presser foot guide.

hRemove the basting stitching.

12

aWrong side of fabric b Right side of fabric

1

2

aWrong side of fabric b Right side of fabric

Blind Hem Stitching 81