Brother HE 120 operation manual Selecting characters, 146, † Example Welcome

SE-BrotherE_sgml.book Page 146 Monday, June 30, 2003 3:44 PM

EMBROIDERY —————————————————————————————————————————————

Press when you want to change the color character by character in character embroidery. Since the sewing machine stops at the end of each character, the upper thread is changed as you sew.

The needle progresses one color or one stitch (if pressed continuously, 9 stitches to 20 stitches) at a time and changes the position for starting the embroidery. This is used when a specific color is not sewn or when restarting the sewing machine after power has been turned off in the middle of the operation.

Back one color	Forward one
	color
Back one stitch	Forward one
	stitch

• For details, refer to "Resewing" (page 157).

The position of the pattern within the embroidery frame can be checked, and the size and angle can be changed.

•For details, refer to "Adjusting the layout" (page 154).

Memo

zWhen an LCD button has dashed lines

around it (i.e.: ), that button cannot be selected.

Selecting characters

Specify the characters for embroidery. A maximum of 25 continuous characters from the same group can be combined.

Memo

zWhen "The pattern is too large for the embroidery frame." is displayed, no more characters can be input.

zCharacters from different groups (sans serif and serif, etc.) cannot be combined.

aSelect the type of characters.

bSelect the characters for embroidery.

If a character is pressed by mistake, press .

†Example: Welcome

Switch between uppercase/lowercase

Switch among large/medium/small sizes

146