Brother HE 120 operation manual Needle and presser foot section, Right-side/rear view, Cover C

SE-BrotherE_sgml.book Page C Monday, June 30, 2003 3:44 PM

Needle and presser foot section

1 2

3

74

6 5

aButtonhole lever

Lower the buttonhole lever when sewing buttonholes and bar tacks.

bNeedle bar thread hooks

Pass the upper thread through the needle bar thread hooks.

cNeedle plate

The needle plate is marked with guides for sewing straight seams.

dBobbin cover/Shuttle

Remove the bobbin cover, and then insert the bobbin into the shuttle.

eFeed dogs

The feed dogs feed the fabric in the sewing direction.

fPresser foot

The presser foot applies pressure consistently on the fabric as the sewing takes place. Attach the appropriate presser foot for the selected stitching.

gPresser foot holder

The presser foot is installed onto the presser foot holder.

Right-side/rear view

1

2

3

4

8

57

6

aHandle

Carry the sewing machine by its handle when transporting the machine.

bBalance wheel

Turn the balance wheel toward you to raise and lower the needle to sew one stitch.

cEmbroidery card slot Insert the embroidery card.

dMain power switch

Use the main power switch to turn the sewing machine on and off.

ePower supply jack

Insert the plug on the power supply cord into the power supply jack.

fFoot controller jack

Insert the plug on the end of the foot controller cable into the foot controller jack.

gAir vent

The air vent allows the air surrounding the motor to be exchanged. Do not cover the air vent while the sewing machine is being used.

hFeed dog position switch

Use the feed dog position switch to lower the feed dogs.

Memo

zRefer to Cover B, C, D or E pages while you are learning to use your machine.

Cover C