Xantrex Technology 809-0910 Clock Menu Configuration Items, Setting the time, To set the clock

Clock Menu Configuration Items

Clock Menu Configuration Items

Menu
item	Description	Values	Default
Set Time	Sets reference time for the	12:00 AM–11:59 PM,	n/a
	power system.	00:00–23:59
Set Date	Sets the reference date for	month day year	n/a
	the power system.	(Jul 1, 04, for example)
12/24	Configures the System	12hr, 24hr	12hr
Hour	Control Panel to use a 12-
	hour clock or 24-hour
	clock.

Setting the time

Because the System Control Panel keeps time for the power system, setting the clock to the correct local time is essential for the system to operate as expected. The clock also provides the time stamps for the Warning, Fault, and Event logs.

When you first power up the System Control Panel, it will not begin operating normally until you set the time.

To set the clock:

1.On the Clock menu, with Set Time highlighted, press Enter.

2.Press Enter to highlight the hour.

3.Use the up arrow or down arrow button to change the hour.

4.When the correct hour is shown, press Enter to select it and highlight the minute.

5.Use the up arrow or down arrow button to change the minute.

6.When the correct minute is shown, press Enter to select it and highlight the AM/PM value.

If you are using a 24-hour clock, you will return to Set Time at this point. Proceed to step 9.

7.Use the up arrow or down arrow button to choose AM or PM.

8.When the correct value is shown, press Enter to select it and return to the Clock menu.

9.Press Enter to return to the Select Device menu.

975-0083-01-01 4–7