Warnings and Faults
To return to the System Panel menu:
◆Press Exit.
Viewing individual fault messages from the fault log
On the fault log, you can also select an individual fault and view its details.
To view details for a fault:
1.Use the up arrow or down arrow button to highlight the fault message you want to view.
2.Press Enter.
The complete fault message appears.
To return to the fault log:
◆Press Exit (as indicated by the arrow marked “cancel”).
To proceed to the device menu and reconfigure the device to eliminate the fault condition:
◆Press Enter (as indicated by the arrow marked “continue”).
On the device menu, you can also attempt to clear the fault by selecting Clear Faults.
Viewing multiple fault messages
If several faults occur before you can acknowledge or clear them, the System Control Panel displays the accumulated messages on a fault list. The fault list displays messages from all
To view a message from the fault list:
1.On the fault list, use the up arrow or down arrow button to highlight the fault message you want to view.
2.Press Enter.
The complete fault message appears.
3.To return to the fault list, press Exit.
Or
To return to the System Control Panel menu, press Enter.
Each time you return to the fault list after viewing a complete message, the message you viewed is removed from the list.
