Installation

Installing the System Control Panel

 

The System Control Panel is designed to be flush mounted through an

 

opening in a wall and secured with four #6 screws. Use the supplied

 

mounting template to precisely mark the opening and screw hole

 

locations.

Planning an

The System Control Panel requires no connections other than the network

installation

cables that plug into the back of the unit. Because you cannot access the

 

network inputs once the unit is mounted, the network cables need to be

 

routed through the wall before securing the System Control Panel.

Materials and tools required

Choosing a location

CAUTION

Allow at least 2 ¼ inches (57 mm) of space behind the wall to accommodate the depth of the unit and allow room for the network cables to bend.

Refer to the Xanbus System Installation Guide for more information about planning and installing a network that includes the System Control Panel.

You will need these materials and tools to complete the installation:

mounting template sticker (supplied)

four #6 screws (supplied)

Phillips head screwdriver

jigsaw or small keyhole saw

power drill with 1/8" bit (optional)

Xantrex network cables or equivalent

Choose a location that is easily accessible. The System Control Panel should be mounted where it is easily visible, with unobstructed access to the screen and push buttons.

The location should be indoors, dry, and free from corrosive or explosive fumes.

2–2

975-0083-01-01

Page 20
Image 20
Xantrex Technology 809-0910 manual Installing the System Control Panel