Warnings and Faults
Figure 5-7 System Control Panel warning log
Viewing individual warning messages from the warning log
On the warning log, you can also select an individual warning and view its details.
To view details for a warning:
1.Use the up arrow or down arrow button to highlight the warning message you want to view.
2.Press Enter.
The complete message appears.
To return to the warning log:
◆Press Exit (as indicated by the arrow marked “cancel”).
To proceed to the device menu and reconfigure the device to eliminate the warning condition:
◆Press Enter (as indicated by the arrow marked “continue”).
Fault messages
Fault messages appear when the System Control Panel’s operation is affected by a condition that requires immediate attention. When a fault occurs, the System Control Panel stops operating until either the fault condition goes away or until you manually clear the fault and take action to eliminate the fault condition.
