Configuring the System

menu

Figure 3-3System screen of Freedom SW 3000 (example)

Selecting the device from the Select Device menu

Use this procedure to select a device before changing a setting.

To select a device:

1.On the Select Device menu, press the down arrow button to highlight the device you want.

InvChg

InvChg will show if there are no

 

compatible inverter/chargers

 

connected to the SCP.

Figure 3-4Select Device menu

2.Press Enter.

The menu for the selected device appears.

Selecting and adjusting the changeable setting

Device menu

Identifying changeable settings

You can view and change device settings from the device menu. The number of settings on the device menu will depend on whether you have selected to view basic or advanced menus. See “Viewing Advanced Menus” on page 5–5.

A device menu displays a list of status information and changeable settings. Changeable settings are enclosed in square brackets. Values in the right-hand column without brackets are status information only. You cannot select or change them.

Use this procedure to change any device setting.

975-0083-01-01

3–5

Page 27
Image 27
Xantrex Technology 809-0910 manual Selecting the device from the Select Device menu, To select a device