Warnings and Faults
If you see a warning message on the System Control Panel, you will have to acknowledge it and (if necessary) clear it. Acknowledging the warning allows you to continue operating the System Control Panel. Clearing the warning message stops the warning condition from escalating into a fault.
Acknowledging warning messages
Automatic | Acknowledging an automatic warning message removes the message |
warnings | from the System Control Panel screen. |
| To acknowledge an automatic warning message, press Enter. After you |
| acknowledge the warning, the System Control Panel displays the menu |
| for the device that caused the warning. |
| The System Control Panel will remove an unacknowledged automatic |
| warning message from the screen after three minutes. However, if the |
| condition that caused the warning still exists, the warning message will |
| reappear. |
| You can view a list of the last 20 warning messages from the System |
| Control Panel on the Warning log. See “Viewing the System Control |
| Panel warning log” on page |
Manual | A manual warning message requires you to make a choice (usually by |
warnings | pressing Enter for “yes” or Exit for “no”) before you can proceed |
| monitoring or configuring the System Control Panel. It will not disappear |
| after three minutes. After you respond to the warning message the System |
| Control Panel will clear the warning message and return to the screen it |
| was displaying before the warning message appeared. |
Clearing warning messages
Automatic warning messages clear when the warning condition on the System Control Panel disappears or when the criteria for clearing the warning are met.
You can clear a manual warning message by pressing Enter or Exit in response to the message.
Viewing multiple warning messages
If several warning messages occur before you can acknowledge or clear them, they are displayed together on a warning list. The warning list contains messages from every
