OSD menu automatic close function

ABOUT THE OSD MENU AUTOMATIC CLOSE FUNCTION

By default, the OSD menu will disappear automatically after approximately 90 seconds of inactivity. However, this function can be disabled so that the OSD menu remains on the screen until manually closed.

TO ENABLE/DISABLE THE OSD MENU AUTOMATIC CLOSE FUNCTION:

1Bring up the OSD main menu.

2Navigate to the Configuration > User Interface > Menu menu.

3Enter the Automatic Close submenu.

4Select Enabled/Disabled as desired and confirm.

Power status indicator light

ABOUT THE POWER STATUS INDICATOR LIGHT

By default, when the display is switched on, the power status indicator light is dimmed. This behavior can be changed so that the power status indicator light will be blue when the display is switched on.

When the display is in stand-by mode, the power status indicator light will always turn orange, even when the power status indicator light is disabled.

TO ENABLE/DISABLE THE POWER STATUS INDICATOR LIGHT:

1Bring up the OSD main menu.

2Navigate to the Configuration > User Interface > Indicator Lights menu.

3Enter the Power Status submenu.

4Select Enabled/Disabled as desired and confirm.

28 Coronis Fusion 10MP

Page 28
Image 28
Barco 10MP manual OSD menu automatic close function, Power status indicator light