POWER CONNECTION - DISPLAY WITH EXTERNAL 24 VDC POWER

SUPPLY

Power requirements: The display must be powered using the delivered medical approved 24 VDC SELV power supply.

The medical approved DC power supply must be powered by the AC mains voltage (protective earth terminal).

POWER CORDS:

Utilize a UL-listed detachable power cord, 3-wire, type SJ or equivalent, 18 AWG min., rated 300 V min., provided with a hospital-grade type plug 5-15P configuration for 120V application, or 6-15P for 240V application.

Do not overload wall outlets and extension cords as this may result in fire or electric shock.

Mains lead protection (U.S.: Power cord): Power cords should be routed so that they are not likely to be walked upon or pinched by items placed upon or against them, paying particular attention to cords at plugs and receptacles.

WATER AND MOISTURE

Never expose the display to rain or moisture.

Never use the display near water - e.g. near a bathtub, washbasin, swimming pool, kitchen sink, laundry tub or in a wet basement.

VENTILATION

Do not cover or block the ventilation openings in the cover of the set. When installing the display in a cupboard or another closed location, heed the necessary space between the set and the sides of the cupboard.

INSTALLATION

Place the display on a flat, solid and stable surface that can support the weight of at least 3 displays. If you use an unstable cart or stand, the

48 Coronis Fusion 10MP

Page 48
Image 48
Barco 10MP manual Power Connection Display with External 24 VDC Power Supply, Power Cords, Water and Moisture, Ventilation