adjust certain video settings yourself. The start to this is selecting one of the following image source selection modes available for your display:

Automatic

In this mode, your display automatically

 

detects the connected video input signals,

 

attaches them to the correct display side

 

and applies the correct video settings to it

 

(resolution, video encoding mode, refresh

 

rate,...).

 

No video settings are available when this

 

mode is selected.

 

 

One Image Source

This mode is intended for displaying and

 

manually configuring only one connected

 

video input signal.

 

When selecting this mode, the video

 

settings become available for the selected

 

video input signal.

 

 

Two Image Sources

This mode is intended for displaying and

 

manually configuring two connected video

 

input signals (one on each display side).

 

When selecting this mode, the video

 

settings become available for the selected

 

video input signal on each side of the

 

display.

 

 

TO SELECT AN IMAGE SOURCE SELECTION MODE:

1Bring up the OSD main menu.

2Navigate to the Configuration > Image Sources menu.

3Enter the Image Source Selection submenu.

4Select one of the available image source selection modes and confirm.

Coronis Fusion 10MP 37

Page 37
Image 37
Barco 10MP manual To Select AN Image Source Selection Mode