First time starting up
You are now ready to start up your CORONIS FUSION 10MP display system for the first time.
1Switch on your CORONIS FUSION 10MP display as described in
2Turn on the computer connected to your display.
If you have properly installed your display and display controller, the Windows
Your CORONIS FUSION 10MP display will be running in a basic video mode at a default refresh rate when first time starting up.
If you are using a Barco display controller, please consult the user guide delivered with it to install the drivers, software and documentation. When this is done, your display will automatically detect the connected video input signal(s) and apply the correct video mode and refresh rate.
