TO SELECT A DISPLAY FUNCTION:
1Bring up the OSD main menu.
2Navigate to the Configuration > Calibration menu.
3Enter the Display Function submenu.
4Select one of the available display functions and confirm.
Ambient Light Compensation (ALC)
ABOUT ALC
Ambient Light Compensation (ALC) can only be enabled on your display when the DICOM display function is selected. Therefore, please refer to “Display functions” on page 32 to correctly set the display function.
When ALC is enabled, the DICOM display function will be recalculated taking a preset ambient light correction value into account. This value is determined by the selected reading room. Therefore, it is also important to select a realistic reading room when enabling ALC. This can be done by following the instructions in “Reading rooms” on page 34.
TO ENABLE/DISABLE ALC:
1Bring up the OSD main menu.
2Navigate to the Configuration > Calibration > Ambient Light menu.
3Enter the Ambient Light Compensation submenu.
4Select Enabled/Disabled as desired and confirm.
