Xantrex Technology 809-0910 manual Purpose, Scope, Firmware Revision, Audience, Organization

About This Guide

Purpose

The purpose of this Owner’s Guide is to provide explanations and procedures for installing, operating, maintaining, and troubleshooting the System Control Panel.

Scope

The Guide provides safety guidelines, setup information, and procedures for installing and configuring the System Control Panel. This Guide also includes information about operating and troubleshooting the unit. This Guide does not contain guidelines for configuring every Xanbus-enabled device that the System Control Panel monitors and controls. See the owner’s guide or operation guide for each Xanbus-enabled device for detailed configuration information.

Firmware Revision

The information in this manual applies to firmware revision 2.01.00. Some System Control Panel features and functions described in this manual may be incompatible with earlier firmware revisions. To view the firmware revision number of your product, see “Viewing device information” on page 4–11.

Audience

The Guide is intended for anyone who needs to install and/or operate the System Control Panel. Installers should be certified technicians or electricians.

Organization

This Guide is organized into six chapters and one appendix.

Chapter 1, “Introduction”, introduces and describes features of the

Xantrex System Control Panel.

iii