Maintenance, General Notes, Cleaning the unit | JVC 0303MWMMDWJEM

Maintenance

To get the best performance of the unit, keep your discs, tapes and mechanism clean.

English

General Notes

In general, you will have the best performance by keeping your discs, tapes and the mechanism clean.

•Store discs and tapes in their cases, and keep them in cabinets or on shelves.

•Keep the electronic swing panel closed when not in use.

Cleaning the unit

•Stains on the unit

Should be wiped off with a soft cloth. If the unit is heavily stained, wipe it with a cloth soaked in water- diluted neutral detergent and wrung well, then wipe clean with a dry cloth.

•Since the unit may deteriorate in quality, become damaged or get its paint peeled off, be careful about the following:

-DO NOT wipe it with a hard cloth.

-DO NOT wipe it strong.

-DO NOT wipe it with thinner or benzine.

-DO NOT apply any volatile substance such as insecticides to it.

-DO NOT allow any rubber or plastic to remain in contact with it for a long time.

Handling discs

•Remove the disc from its case by holding it at the edge while pressing the center hole lightly.

• Do not touch the shiny surface of the disc, or bend the disc.

•Put the disc back in its case after use to prevent warping.

• Be careful not to scratch the surface of the disc when placing it back in its case.

•Avoid exposure to direct sunlight, temperature extremes, and moisture.

To clean the disc

Wipe the disc with a soft cloth in a straight line from center to edge.

DO NOT use any solvent—such as conventional record cleaner, spray, thinner, or benzine—to clean the disc.

Handling cassette tapes

•If the tape is loose in its cassette, take up the slack by inserting a

pencil in one of the reels and rotating.

• If the tape is loose, it may get stretched, cut, or caught in the cassette.

• Be careful not to touch the tape surface.

•Avoid the following places to store the tape:

- In dusty places

- In direct sunlight or heat - In moist areas

-On a TV or speaker

-Near a magnet

66

Image 69

JVC 0303MWMMDWJEM, LVT0954-010A Maintenance, General Notes, Cleaning the unit, Handling discs, Handling cassette tapes

Contents

Consists of CA-UXA7DVD and SP-UXA7DVD UX-A7DVD UX-A7DVD Important for Laser Products Introduction Precautions Contents Location of the Buttons and Controls Main UnitMain unit Display window Display window on the electronic swing panel See pages in parentheses for details Remote Control Playable Disc Types About Discs About audio formats Disc Structure Putting the Batteries into the Remote Control Connecting AntennasGetting Started Unpacking You can connect the speakers using the speaker cords Connecting SpeakersAM antenna To connect an outdoor AM antenna To remove the speaker grilles Connecting a TVTo select the color system Speaker grilles are removable as illustrated below Connecting Other Equipment To connect analog audio equipment To stop and cancel the display demonstration manually To select the On-screen language for the setting menu-Step Setting the DVD PlayerSelecting the output signal type Setting is finished On the remote control only Go to To select the monitor type on the next Press Choice while holding down ShiftPress Cursor ∞ repeatedly to move Press Cursor 3/2 to select the language you want Go to To select the output signal type on the next To select the monitor type-StepGuidelines to select the monitor type Guidelines to select the output signal type To select the output signal type-StepPlayback Output signals Disc Setting the Clock To turn off the clock indication power save modeTo show the clock when the unit is turned on Basic and Common Operations Remote control To turn off the unit automatically Auto Power Off Turning On the Power To turn down the volume level temporarily Adjusting the VolumeSelecting the Sources and Starting Play To listen to the sound from external equipment, press Reinforcing the Bass Sound Adjusting the Tone To select the illumination color Changing the Display IlluminationTo create your favorite colors To change the display brightness On the main unit only Adjusting the Audio Input Level Prohibiting Disc Ejection Listening to FM and AM Broadcasts Remote control Setting the AM Tuner Interval Spacing Tuning in to a StationTo change the FM reception mode Tuning in to a Preset Station Presetting StationsPress the number buttons to select a preset number Press SET again DVD Playing Back Discs Loading a Disc On-screen guide iconsTo prevent screen burn-out with the screen saver DVD Basic Operations To go to another chapterTo show the on-screen indication To increase the DVD’s sound level SVCD/VCD/Audio CD Basic OperationsCurrent disc information Disc playing information To stop play for a moment, press DVD #¥8 or 8 on To go to another trackWhile playing a disc To erase the on-screen indication, press on Screen About MP3 disc MP3 Basic OperationsUnavailable functions for MP3 disc Available for MP3 To go to another group Searching for a Particular PointForward search Reverse search Playing Back by Using the Disc Menu When playing a DVDWhen playing a Svcd or VCD Repeating Playback PBC operation conceptRepeat play B repeat play On the remote control only Press Play Mode during playFor SVCD, VCD, or Audio CD Press Cursor 3/2 to move to A-B Repeat Programming the Playing Order Program Play Press Play ModePress Cursor 3/2 to move to PROGRAM, then press Enter To program other titles, tracks, or groups, repeat step To check the programed contents To modify the programTo exit from the program play To exit from the random play Playing at Random-Random PlayPress Cursor 3/2 to move to RANDOM, then press Enter To skip the playing title, track, or group, press ¢ Tape Playing Back Tapes Playing Back a Tape To play both sides-Reverse mode Functions in this section do not work for MP3 discs Special Disc Playback Press Cursor 3/2 to move to Chap SEARCH, then press Enter To erase the on-screen indication, press Play ModeEnter a chapter number by pressing the number buttons 0 to Press Cursor 3/2 to move to Time SEARCH, then press Enter Viewing the Desired Chapters/Tracks- Digest Selecting Multi-Angle Views To change angle viewsTo show all angle views Selecting the Subtitle Language Selecting the Audio Language or Sound Playing Back in Slow-Motion-Slow Playing a Still Picture/Frame-by-Frame Enjoying Virtual Surround Sound Zooming in the Picture-ZoomYou can zoom a picture by 2 times To go back to normal play, press Zoom while holding DVD Tape FM/AM AUX/MD Recording Before You Start Recording on a Tape To clean the heads, capstans, and pinch rollersTo protect your recordings To keep the best recording and playback sound quality Prepare a disc Recording a Disc onto a Tape -Disc Synchronized RecordingPress REC on the main unit To stop recording, press Recording Other Sources onto a Tape When you press REC while pausing a trackTo record a single track during play To record from external equipment Bass Using the Microphone If howling or squealing feedback occurs while using To adjust the keySinging Along Karaoke To apply an echo to your voice TOP Menu Changing the DVD Initial Settings Setting menu Basic Procedure Changing the Initial Language Settings Changing the Various Audio SettingsMore about Down MIX Changing the System Settings Changing the Display SettingsOn the System menu, you can change the following settings More about Compression On the remote control only Press Enter while holding down Setting the parental lockUnlocking the Parental Lock Temporarily Press Cursor 5/∞ to select YES, then press Display Using the Timers How the Recording Timer actually works Using the Recording Timer Using the Daily Timer How the Daily Timer actually worksTo turn off the Recording Timer after its setting is done To turn off the Daily Timer after its setting is done Volume setting appears in the main displayTo turn on the Daily Timer again You can also use the source selecting buttons How the Sleep Timer actually works Using the Sleep TimerTimer Priority Press Sleep Set AV Compulink Mode in the System menu as follows Using AV Compu Link Control SystemAV Compu Link Connection One-touch DVD play Cleaning the unit MaintenanceGeneral Notes Handling discs Symptom TroubleshootingPossible Cause Action Disc Tape Table of Language Codes Table of Country/Area Codes Zimbabwe Specifications EN, CS Victor Company of JAPAN, Limited 0303MWMMDWJEM