JVC LVT0954-010A manual Setting the Clock, To turn off the clock indication power save mode

English

Setting the Clock

You can set the clock when the unit is either turned on or in

4 Press ¢ or 4 repeatedly to adjust the minute.

• When you press and hold the button, the minute digit

changes continuously.

standby mode.

On the remote control ONLY:

STANDBY/ON

1	2	3
			DISPLAY
4	5	6
			CLOCK/TIMER
7	8	9
			A.P.
			SLEEP OFF
10	0	+10
ON SCREEN	PLAY MODE	REV. MODE	DVD
	ZOOM	DIGEST	COLOR LEVEL
AUDIO	SUB TITLE	ANGLE	DIMMER
TOP MENU		MENU CHOICE
SET	ENTER
SET			CANCEL
DVD	TAPE	FM/AM AUX/MD
SELECT
STROBE			RETURN
PREV.	NEXT	SLOW –	SLOW +
GROUP SKIP
KEY	DIGITAL	3D PHONIC	AHB PRO
CONTROL	ECHO

DISPLAY

CLOCK/TIMER

CANCEL

PREV. NEXT

GROUP SKIP

• You can also use the number buttons.

– To adjust the minute to 5, press 5.

– To adjust the minute to 25, press +10, +10, then 5.

– To adjust the minute to 30, press +10, +10, then 10

(or press +10 three times, then 0).

5 Press SET to finish setting the clock.

The built-in clock starts.

To adjust the clock again

Once you have adjusted the clock, you need to press CLOCK/TIMER repeatedly until the clock setting screen appears in the main display (the hour digit starts flashing).

When you unplug the AC power cord or if a power failure occurs

1 Press CLOCK/TIMER.

“0:00” appears in the main display with the hour digit flashing.

2 Press ¢ or 4 repeatedly to adjust the hour.

•When you press and hold the button, the hour digit changes continuously.

•You can also use the number buttons.

–To adjust the hour to 5, press 5.

–To adjust the hour to 12, press +10, then 2.

–To adjust the hour to 20, press +10, then 10 (or press +10 twice, then 0).

3 Press SET to set the hour.

The minute digit starts flashing.

•If you want to change the hour again, press

CANCEL.

The hour digit starts flashing again.

The clock loses its setting and resets to “0:00.” If this happens, set the clock again.

To turn off the clock indication (power save mode)

On the remote control ONLY:

Press DISPLAY while the unit is in standby mode.

“DISPLAY OFF” appears in the main display and the clock indication goes off.

To turn on the clock indication, press DISPLAY again while the unit is in standby mode.

“DISPLAY ON” appears in the main display.

To show the clock when the unit is turned on

On the remote control ONLY:

Press DISPLAY.

The clock indication appears in the main display.

To return to the normal display, press DISPLAY again.

17