JVC LVT0954-010A DVD Basic Operations, To go to another chapter, To show the on-screen indication

English

DVD Basic Operations

Available for: DVD

•To play back a SVCD, VCD, or Audio CD, see page 30.

•To play back an MP3 disc, see page 32.

•Playback will stop when a disc menu appears on the TV screen. If a menu appears while playing, see “Playing

Back by Using the Disc Menu” on page 34.

1 Load a disc.

•With some DVDs, playback starts automatically after you close the disc tray by pressing DVD 0.

2 Press DVD #/8on the main unit (or DVD SELECT 3 on the remote control).

After reading the disc contents, playback starts from the first chapter of the first title.

• The disc playing information appears on the display.

Current title No.

Current chapter No.

VD V D

Elapsed playing time

To go to another chapter

Press 4 or ¢ during playback.

•4: Goes back to the beginning of the current or previous chapters.

•¢: Skips to the beginning of the next or succeeding chapters.

Some DVDs may not accept this operation.

To go to a particular title or chapter directly using the number buttons

On the remote control ONLY:

•Pressing the number buttons before playback allows you to start playing with the title number you want.

•Pressing the number buttons during playback allows you to start playing with the chapter number of the currently playing title you want.

Ex.: To select number 5, press 5. To select number 10, press 10.

To select number 20, press +10, +10 then 0. To select number 23, press +10, +10 then 3.

If a menu is shown on the TV while playing a DVD

Number buttons may be used for selecting an item in the menu. (See page 34.)

To stop play for a moment, press DVD #¥8 (or 8 on the remote control).

While pausing, the elapsed playing time and the disc indicator flash on the display.

•To start playback again, press DVD #¥8 again (or press DVD SELECT 3 on the remote control).

To stop playing, press 7.

•This unit can store the stop point, and when you start playback again by pressing DVD #¥8 (or DVD SELECT 3 on the remote control), playback starts from the position where you have stopped—Resume play. (“RESUME” appears on the display.)

To use Resume play, you need to turn on the Resume function. (See page 58.)

•To stop completely when you use the Resume function, press 7 twice.

Playback will start from the beginning of the disc.

To show the on-screen indication

You can show the following information on the TV while playing back a DVD.

On the remote control ONLY:

To show the on-screen indication, press ON SCREEN while playing a DVD.

•Each time you press the button, the indication on the TV change as follows:

Current disc information

Off	Disc playing
(No indication)	information

29