JVC LVT0954-010A manual Turning On the Power, To turn off the unit automatically Auto Power Off

English

Turning On the Power

When you press one of the source selecting buttons, the unit automatically turns on (and starts playback if the source is ready).

On the remote control:	DVD	TAPE FM/AM AUX/MD
	SELECT

On the main unit:	*
	REV.MODE	AUX/MD
DVD	TAPE	FM/AM

* Pressing DVD 0 also turns on the unit.

To turn on the unit without playing, press

STANDBY/ON (or on the main unit). The STANDBY lamp on the main unit goes off. “HELLO” appears in the main display.

To turn off the unit (on standby), press

STANDBY/ON (or on the main unit) again. The STANDBY lamp on the main unit lights up. “SEE YOU” appears in the main display.

•When you use the Resume function (see page 58), turning off the power while playing a disc stops playback and stores the stop point.

By pressing DVD SELECT 3 (or DVD #¥8 on the main unit), you can turn on the unit and start playback again from the position where you have stopped— Resume play. (“RESUME” appears in the main display.)

•A little power is always consumed even while the unit is in standby mode.

To switch off the power supply completely, unplug the

AC power cord from the AC outlet.

When you unplug the AC power cord or if a power failure occurs

The settings you have done will be erased.

To turn off the unit automatically (Auto Power Off)

Using the Auto Power Off function, the unit automatically turns itself off if no sound comes in for more than 3 minutes when the DVD player or “TAPE” is selected as the source.

If an operation is done during this 3-minute period, Auto Power Off is canceled temporarily even though no sound comes in.

•You can also turn off the unit automatically by using the sleep timer. (See page 64.)

On the remote control ONLY:

To activate Auto Power Off, press A.P.OFF while holding down SHIFT.

The A.P.off (Auto Power off) indicator lights up on the display.

•When no sound comes in, the A.P.off indicator starts flashing on the display. About 20 seconds before the unit turns itself off, “AUTO POWER OFF” starts flashing in the main display.

A.P.off indicator

A.P.off

To deactivate Auto Power Off, press A.P.OFF while

holding down SHIFT.

The A.P.off indicator goes off.

19