58
English
• SCREEN SAVER:
Select the screen saver to prevent the TV monitor from
burning out. (See page 28.)
– Select “MODE 1” to activate the screen saver by
making the TV screen dark.
– Select “MODE 2” to activate the screen saver by
showing the original screen-saver.
– Select “OFF” to deactivate this function.
• ON SCREEN GUIDE:
By watching the on-screen guide icons shown on the TV
screen, you can see what you are doing while operating
the DVD player. (See page 28.)
– Select “ON” to show the on-screen guide icons.
– Select “OFF” to deactivate this function.
Changing the System SettingsOn the SYSTEM menu, you can change the following
settings.
• RESUME:
This unit can store the stop-point where DVD, SVCD or
VCD playback stops. When you press DVD SELECT 3
(or DVD #¥8 on the main unit) to start playback again,
it starts from where it has been stopped—Resume play.
•Pressing DVD 0 to eject the disc erases the stored
position.
– Select “ON” to activate Resume play.
– Select “OFF” to deactivate Resume play. Playback
always starts from the beginning of a disc.
• AV COMPULINK MODE:
When connecting this unit to a JVC TV with the AV
COMPU LINK remote control system, select the proper
setting. See page 65 for more details.
Selectable modes—“DVD 1,” “DVD 2,” and “DVD 3.”
• COMPRESSION:
When listening to the sound with only Dolby Digital,
you can produce a powerful sound even at a low volume
level by compressing the dynamic range (difference
between the maximum and minimum sound levels).
– Select “ON” when you want to apply the compression
effect (useful late at night).
– Select “OFF” when you want surround sound with its
full dynamic range (no effect applied).
More about COMPRESSION
• The COMPRESSION function does not work when the 3D
PHONIC function is activated. (See page 48.)
• The COMPRESSION function does not affect digital signals
output through the DVD OPTICAL DIGITAL OUT terminal.
Changing the Display SettingsOn the DISPLAY menu, you can change the following
display settings.
• MONITOR TYPE:
Set the monitor type to use while playing back a DVD
recorded with 16:9 wide screen video signal. (See also
page 15.)
– Select “4:3 LB (Letter Box) ” when viewing on a
TV whose aspect ratio is 4:3.
While viewing a wide screen picture, the black bars
appear on the top and the bottom of the screen.
– Select “16:9 WIDE” when viewing on a TV whose
aspect ratio is 16:9.
– Select “4:3 PS (Pan Scan) ” when viewing on a
TV whose aspect ratio is 4:3.
While viewing a wide screen picture, the black bars do
not appear; however, a portion of the left and right
edges of the picture will not show on the screen.
MONITOR TYPE
SCREEN SAVER
ON SCREEN GUIDE
4:3 LB
MODE 2
ON
PRESS KEY
EXIT
RESUME
AV COMPULINK MODE
OFF
DVD 1
PRESS KEY
EXIT
EN55_59UX_A7DVD[UF].pm6 03.2.26, 9:27 PM58