54
English
Singing Along (Karaoke)
You can enjoy singing along (Karaoke) by using the
microphone.
IMPORTANT:
• Always set the MIC VOL control to MIN when
connecting or disconnecting the microphone.
• When you do not use the microphone, keep the
microphone unconnected.
If howling or squealing (feedback) occurs while using
the microphone, take the following actions to prevent
these noises.
• Adjust the MIC VOL and VOLUME controls (or
VOLUME + / – on the remote control).
• Avoid pointing the microphone towards the speakers.
1
Rotate the MIC VOL control to MIN.
2
Connect the microphone (not supplied) by plugging
it into the MIC jack.
3
Start playing the source—disc, tape or external
equipment connected to the AUX/MD jacks.
• When playing a multiplex karaoke disc, you can
select the audio channel to play back. (See page 46.)
4
Rotate the MIC VOL and VOLUME controls (or
VOLUME + / – on the remote control) as you sing
into the microphone.
• By pressing REC, you can record your singing along
if you want. (For more details, see pages 51 and 52.)

To apply an echo to your voice

On the remote control ONLY:
Press DIGITAL ECHO so that the ECHO indicator
lights up on the display.
Each time you press the button, the echo level changes as
follows:
• As the number increases, a stronger echo effect applies
to your voice.

ECHO LEVEL 1 ECHO LEVEL 2

ECHO LEVEL 3

ECHO LEVEL OFF

(Canceled)

VCD
ECHO1
ECHO indicator

To adjust the key

You can adjust the key of the sound to fit to your voice.
• This function is available while playing back DVDs,
SVCDs, VCDs, or Audio CDs loaded on the DVD
player.
On the remote control ONLY:
Press KEY CONTROL # or KEY CONTROL I to
adjust the key.
The following display appears.
• You can also check your key adjustment on the TV.
You can adjust the key within the range from “–6” to “+6”
by 1 step.
To raise the key, press KEY CONTROL #.
To lower the key, press KEY CONTROL I.
To cancel the key control, set the key to “0” by pressing
KEY CONTROL # or KEY CONTROL I.
When the current title or track finishes playing
The key returns to “0.”
When the 3D PHONIC function (see page 48) is
activated
If you set the key to other than “0,” the 3D PHONIC function is
temporarily canceled even though the 3D PHONIC indicator lights up.
Setting the key back to “0” makes the 3D PHONIC function
activated again.

To use the microphone only

Without any background sound, you can use your
microphone and record your voice if you want.
1
Rotate the MIC VOL control to MIN.
2
Connect the microphone.
3
Press AUX/MD to select “AUX/MD” as the source.
• If external equipment is connected to the AUX/MD
jacks, turn it off.
4
Rotate the MIC VOL and VOLUME controls ( or
VOLUME + / – on the remote control).
• By pressing REC, you can record your voice if you
want. (For more details, see pages 51 and 52.)
Current setting
VCD
EN53_54UX_A7DVD[UF].pm6 03.2.26, 9:26 PM54