Kenwood KVT-911DVD Setting the Channel Balance, Test Signal, Adjusting the Front Left Speaker

Channel Level Setting Screen

A B

C D E F G

Setting the Channel Balance

This item allows you to adjust the output level of each type of speaker using the built-in test signal.The output level must be adjusted from the listening position.The factory setup is “0 dB” for all types of speakers.

•You cannot operate when the “Center SP“ is set to "OFF" ( see P 47 ) <When playing with multi-channels>.

•You cannot operate when the “Multi channel“ is set to “2/2“ or “2/0“ ( see P 47 ).

CTest Signal

This item allows you to output the built-in test signal from the speakers. Use the test signal for setting the balance between channels.

Each time you touch [ Noise ] to switch the test signal function on and off.

GReturning to the Sound Effect Menu Screen

Touch [ RTN ] to return to the sound effect menu screen.

AAdjusting the Front Left Speaker

Each time you touch [ ] or [ ] to adjust the front left output level.

BAdjusting the Front Right Speaker

Each time you touch [ ] or [ ] to adjust the front right output level.

DAdjusting the Rear Left Speaker

Each time you touch [ ] or [ ] to adjust the rear left output level.

NOTE

You cannot operate when the “Multi channel“ is set to “3/0“ or “2/0“ ( see P 47 ) <When playing with multi-channels>.

FAdjusting the Rear Right Speaker

Each time you touch [ ] or [ ] to adjust the rear right output level.

NOTE

You cannot operate when the “Multi channel“ is set to “3/0“ or “2/0“ ( see P 47 ) <When playing with multi-channels>.

EAdjusting the Center Speaker

Each time you touch [ ] or [ ] to adjust the center output level.

NOTE

49