The following messages are displayed when certain problems are occurring in your system. Take the recommended actions.
BUS-E50
BUS-E11
Hot Error
Mecha Error
More than two center units are connected.
More than two DSP/EQUALIZER units are connected.
The protective circuit in the unit activates when the temperature inside the unit exceeds 60°C (140°F), stopping all operation.
]Cool down the unit by opening the windows or turning on the air conditioner. As the temperature falls below 60°C (140°F), the disc will start playing again.
The disc player is malfunctioning.
]Eject the disc and try inserting it again. Contact the Kenwood dealer if this indicator continues blinking or the disc cannot be ejected.
Disc Error
Read Error
The unplayable discs is inserted
The disc is
]Load the disc with the labeled side up. The disc is quite dirty.
]Clean the disc, referring to the section on "Cleaning discs" (see p. 5).
Region code Error
Parental level Error
Error 07
Error 17
Error 27
Error 37
Error 47
Error 57
Error 67
The DVD software encoded for other region code.
The parental level is set to high levels.
The unit is malfunctioning for some reason.
]Press the reset button on the unit. If the "Error- ##" code does not disappear, consult your nearest service center.
67
