System Setup Function
System Setup
A | C | D |
System Setup
B | E | E |
ASetting the AV Input-1 Mode
Each time you touch [
<When the
You can select whether to output
" Navigation "
When the Navigation unit is connected to the AV- INPUT1 terminal.
" Video "
When the Video Deck is connected to the AV- INPUT1 terminal.
BSetting the AV Input-2 Mode
Each time you touch [
" Back Camera "
When the Back Camera unit is connected to the
" Normal "
When the Video Deck is connected to the AV- INPUT2 terminal.
CSetting the AV Output Mode
Each time you touch [
" DVD "
Picture/sound from DVD/VCD/CD.
" TV "
Picture/sound from television.
"
Picture/sound from
" AV-IN2 "
Picture/sound from
NOTE
Don’t turn the Dual Zone system ON if discs are played that were recorded by DTS. If it is set ON, the disc’s sound won’t be output.
EAdjusting the Dual Zone Speaker Level
<When the KDS-P900/P901 is not connected>
Touch [ 3 ] to increase the volume.
Touch [ 2 ] to decrease the volume.
NOTE
No display [2zone VOL] when the “2zone” is set to "OFF.
ESelecting the Dual Zone Speaker
<When the
You can select whether to output
Each time you touch [ 2zone SP ], the mode switches as follows:
" Normal "
" Reverse "
NOTE
No display [2zone SP] when the “2zone” is set to "OFF.
DSetting the Dual Zone mode
The following operation allows separate sound sources to control the output of the front and rear speakers.
Each time you touch [ 2zone ], the mode switches as follows:
" ON "
The dual zone system function is on.
" OFF "
The dual zone system function is off.
<When the
Rear speaker: Sound of
Front speaker: Sound of current source
FSetting the Touch Sensor Tone
Each time you touch [ Beep ], the mode switches as follows:
" ON "
Touch sensor tone is turned on
" OFF "
Touch sensor tone is turned off
GSetting the TV Control by Remote On/Off
If this unit also runs when operating other units with different Kenwood remote controls, its remote control function can be turned off.
12
