Kenwood KVT-911DVD DVD,VCD Setup Function, Setting the Priority Language for Menu

DVD,VCD Setup Function

	DVD Setup Screen-1			DVD Setup Screen-2
A	B	C	E	G	H

	D		F	I
A		D
	Setting the Screen Mode		Setting the Priority Language for Voice

Use the procedure described below to set the output screen.

Each time you touch [ Screen ], the mode switches as follows:

" 4:3 LB "

Wide-screen software with pan & scan specification is played in a letter box screen (with black stripes on the top and bottom).

" 4:3 PS "

Wide-screen software with pan & scan specification is played in a panned & scanned screen (with the left and right sides cut off).

" 16:9 "

Set the picture mode of the wide-screen monitor to “FULL”

BSetting the Priority Language for Menu

Set the language used for the menus (title menu, etc.).

Touch [ Menu Lang ] to switch the language select screen. <see p.18>

Set the audio language produced from the speakers.

Touch [ Audio ] to switch the language select screen. <see p.18>

NOTE

The language selected in the initial setup is used immediately after turning power on or replacing disc. If the initially set language does not exist in the disc, the priority language defined for each disc is used.

ESetting the Angle Mark Display

With DVDs on which images photographed from multiple angles are recorded, the angle can be switched during playback.

Each time you touch [ Angle Mark ], the mode switches as follows:

" ON "

Angle mark is displayed.

" OFF "

Angle mark is not displayed.

C Setting the Priority Language for
		F Selecting the Dynamic Range
Subtitle
			Each time you touch [ DRC ], the mode switches
Set the language of the subtitles displayed on
			as follows:
the screen.
			" Standard "
Touch [ Subtitle ] to switch the language select
			For more powerful sound at regular volumes
screen. <see p.18>			" Midnight"
	NOTE		For powerful sound at low volumes
	The language selected in the initial setup is used
				NOTE
	immediately after turning power on or replacing		Doing this operation may raise the sound level.
	disc. If the initially set language does not exist in
			" OFF "
	the disc, the priority language defined for each
			For the regular sound
	disc is used.
				NOTE
				This select can be made when the Dolby Digital
				signal is inputed.

16