5.1 Channels Surround Processor Control Function
Digital Effect Setting Screen
A B C D
E | F | G | H | I |
CSelecting the Digital Input Mode
Each time you touch [ Input Select ] to switch the digital input mode as follows:
" Digital "
Optical digital input.
" Analog "
Analog input.
CAUTION
When playing
BUsing the DOLBY PRO LOGIC
Dolby Pro Logic is a technology developed by Dolby Laboratories for the active decoding of Dolby Surround encoded source.
Each time you touch [ Dolby PL ] to select Dolby Pro Logic on and off .
DSelecting the Dynamic Range
Select the dynamic range for Dolby Digital sound.
Each time you touch [
" Standard "
For more powerful sound at regular volumes.
" OFF "
For regular sound.
GSelecting the Multi Channel
Select the sound output speaker for Multi channel PCM sound.
Each time you touch [ 2 ] or [ 3 ] to select the speaker output as follows:
" 3/2 "
Center, Front and Rear speaker
" 2/2 "
Front and Rear speaker
" 3/0"
Center and Front speaker
" 2/0 "
Front speaker only
ASelecting the Acoustic Image
Each time you touch [ Bi Phantom ] to select the acoustic image on and off .
NOTE
You cannot operate when “Dolby PL“ is set to “OFF”.
ETurning the Center Output On/Off
Each time you touch [ Center SP ] to select center speaker output on and off.
NOTE
This select can be made when the 2 ch PCM signal.
NOTE
You cannot operate when “Dolby PL“ is set to “OFF”.
HDefeat (Crossover network/delay time)
Returns all of the DSP settings to the factory default.
Touch [ DEFEAT ] it returns to the factory default.
IReturning to the Sound Effect Menu Screen
Touch [ RTN ] to return to the sound effect menu screen.
FTurning the Sub Woofer Output On/Off
Each time you touch [ Sub Woofer ] to select sub woofer output on and off.
47
