Kenwood KVT-911DVD instruction manual Audio Control Function

Audio Control Function

Audio Control Screen Sound Preset Screen

A	B		C	D	E		K
	F	G	H	I	J	M N	O

L

P Q R

A Adjusting the Bass Level H Adjusting the Fader Levels

•Each time you touch [ ], the bass level is increased.

•Each time you touch [ ], the bass level is decreased.

•Each time you touch [ ](F), the sound in the front channel emphasized.

•Each time you touch [ ](R), the sound in the rear channel emphasized.

		NOTE		F
					Turning the Loudness On/Off
		No display this item when the DS-P900/P901 is
		connected.			This function amplifies low and high tones
					when the volume is turned down.
B Adjusting the Treble Level					The LOUD indicator is displayed on the source
					control screen, when the loudness function is
	• Each time you touch [		], the treble level is		on.
		increased.			Each time you touch [ LOUD ] to switch the
	• Each time you touch [		], the treble level is
					function on and off.
		decreased.
		NOTE				NOTE
						No display this item when the KDS-P900/P901 is
		No display this item when the KDS-P900/P901 is
						connected.
		connected.

CAdjusting the Balance Levels

•Each time you touch [ ](L), the sound in the left channel is emphasized.

•Each time you touch [ ](R), the sound in the right channel is emphasized.

DAdjusting the Non-Fader Levels <N-F>

<When the KDS-P900/P901 is not connected>

•Each time you touch [ ], the non-fader level is increased.

•Each time you touch [ ], the non-fader level is decreased.

DAdjusting the Sub Woofer Levels <SUB>

<When the KDS-P900/P901 is connected>

•Each time you touch [ ], the sub woofer level is increased.

•Each time you touch [ ], the sub woofer level is decreased.

NOTE

You cannot operate when the “Sub Woofer“ is set to “OFF“ on the digital effect setting Screen ( see.P.47 ).

GExternal Amp Control

Adjust the bass boost level of the external amplifier using the main unit.

Each time you touch [ Amp Ctrl ] to switch the Bass boost level as follows:

" OFF "

Bass boost level is flat.

" MODE1 "

Bass boost level is low (+6dB).

" MODE2 "

Bass boost level is high (+12dB).

NOTE

Refer to the catalog or instruction manual for power amplifiers that can be controlled from this unit.

IAdjusting the Volume Offset

Set the sound level of the each source selected by adjusting the level difference between the basic sound level and the required level.

•Each time you touch [ 3 ], the level is increased.

•Each time you touch [ 2 ], the level is decreased.

44