Kenwood KVT-911DVD Setting the Optical Output Mode, Screen Mode 43 LB 43 PS 169, Stream

Screen Mode

" 4:3 LB " " 4:3 PS " " 16:9 "

GSetting the Optical Output Mode

Converts linear PCM (LPCM) voice signals recorded on the DVD disc to down sampling 48 kHz digital signals and outputs them from the optical cable.

Each time you touch [ Digital Out ], the mode switches as follows:

Audio recording	Optical audio out put
format	"Stream"	"PCM"
Dolby Digital	Dolby Digital	PCM48 kHz /16 bit
LPCM(96 kHz)	With copy grade:PCM 48 kHz /16 bit
	With out copy grade:
LPCM(48 kHz)
	PCM 48/44.1 kHz /24,20,16 bit
MPEG	PCM 48 kHz,44.1 kHz /16 bit
DTS	DTS	Not output

CAUTION

When playing DTS-encoded (CDs), excessive noise may be exhibited from the analog stereo outputs. To avoid possible damage to audio system, the consumer should take proper pro- cautions when the analog stereo outputs of the DVD player is connected to an amplification system. To enjoy DTS Digital Surround (TM) playback, an external 5.1 channel DTS Digital Surround (tm) decoder (KDS-P900/P901) system must be connected to the digital output of the DVD player.

HSwitching to the Rating Level (parental lock) Setting Screen.

Use this function to restrict the viewing of movies to children of appropriate age levels only.

Touch [ Parental ] to switch to rating level setup screen. <see p.20>

IPBC(Playback Control) Function On/Off for VCD version 2.0

Each time you touch [ PBC ], the mode switches as follows:

" ON "

PBC function is turned on

" OFF "

PBC function is turned off

17