C-1 | | ACCESSORIES | C-1 |
OPTIONAL ACCESSORIES | | |
1.K520 Utility Cart — Designed to transport the Lincoln family of small welders. Has provisions for mounting a single gas cylinder. Has front casters and large rear wheels. Handle height is easily adjustable. Bottom tray provided for tools and accessories. Easy assembly required; takes less than 15 minutes.
2.K586-1 Deluxe Adjustable Gas Regulator & Hose Kit
Accommodates CO2 or mixed Gas Cylinders.
3.K663-2 Aluminum Feeding Kit — This kit recom- mended for welding with .035 Aluminum wire. Included with this kit are a drive roll, cable liner and
.035 contact tip. It is important when changing between welding with steel wire and aluminum to exchange feeding components due to the lubricant applied to steel wire. Failure to do so may result in contaminated welds when weld- ing aluminum.
See Maintenance section for instructions on installing drive roll, cable liner, contact tip and their proper con- figuration.
4.K549-1 .035 (0.9 mm) Innershield Welding Kit Includes a contact tip, a gasless nozzle and a cable liner to permit the Magnum™ 100L gun and cable to use .030-.035”(0.8-0.9 mm) diameter flux- cored electrode. Also included is a spool of .035 (0.9 mm) Innershield NR-211-MP.
5.KP666-035c Knurled Drive Roll (optional) -- Reversable Drive Roll with double knurled grooves for .035 (0.9mm) cored electrode.
6.K549-4 .045” (1.2mm) Innershield Welding Kit Includes a contact tip, a gasless nozzle, a .045” (1,2mm) knurled drive roll, acable liner and guide tubes to permit the Magnum™ 100L gun and cable to use .045” (1.2mm ) diameter flux- cored electrode. Also included is a spool of .045 (1.2mm) Innershield NR-211-MP.
