Pioneer VSX-91TXH manual Fine Speaker Distance, Adjust the level of the left channel

07The System Setup menu

The volume increases to the 0 dB reference level.

3.Manual MCACC 3a.Fine Channel Level

1Select ‘Fine SP Distance’ from the Manual MCACC setup menu.

a.Fine	Ch	Level
b.Fine	SP	Distance
c.Standing		Wave	Please Wait... 20
d.EQ	Adjust
e.EQ	Professional		Caution!
			Loud test tones
			will be output.
		:Return	:Cancel

2 Adjust the level of the left channel.

This will be the reference speaker level, so you may want to keep the level around 0 dB so that you’ll have plenty of room to adjust the other speaker levels.

3a.Fine Channel Level

MCACC:M1. MEMORY 1

L(Reference)

+0.5dB

Enter:Next :Cancel

• After pressing ENTER, test tones will be output.

3Select each channel in turn and adjust the levels

(+/–10dB) as necessary.

Use / to adjust the volume of the speaker you

selected to match the reference speaker. When it sounds like both tones are the same volume, press  to confirm and continue to the next channel.

3a.Fine Channel Level

L		+0.5dB (Reference)
R	[	0.0dB ]
C		+1.0dB
SL	[	-3.0dB	]
SR	[ +10.0dB ]
SBL	[	-10.0dB ]
SBR	[	+9.5dB ]
SW	[	-1.5dB ]

:Finish

•For comparison purposes, the reference speaker will change depending on which speaker you select.

•If you want to go back and adjust a channel, simply use / to select it.

4 When you're finished, press RETURN.

You will return to the Manual MCACC setup menu.

Fine Speaker Distance

• Default setting: 10.0 ft (3.0 m) (all speakers)

For proper sound depth and separation with your system, it is necessary to add a slight bit of delay to some speakers so that all sounds will arrive at the listening position at the same time. The following setting can help you make detailed adjustments that you may not achieve using the Manual speaker setup below.

3.Manual		MCACC		3b.Fine SP Distance
	a.Fine	Ch	Level	MCACC:M1. MEMORY		1
	b.Fine	SP	Distance
	c.Standing		Wave
	d.EQ	Adjust		L(Reference)
	e.EQ	Professional			10.0 ft
			:Return	Enter:Next		:Cancel

2Adjust the distance of the left channel from the listening position.

3Select each channel in turn and adjust the distance

as necessary.

Use / to adjust the delay of the speaker you selected to match the reference speaker. The delay is measured in terms of speaker distance from 0.5 to 45.0 feet.

3b.Fine	SP	Distance
L		10.0ft (Reference)
R	[	9.0ft ]
C		9.5ft
SL	[	6.0ft	]
SR	[	6.5ft ]
SBL	[	6.0ft ]
SBR	[	6.5ft ]
SW	[ 12.5ft ]

:Finish

Listen to the reference speaker and use it to measure the target channel. From the listening position, face the two speakers with your arms outstretched pointing at each speaker. Try to make the two tones sound as if they are arriving simultaneously at a position slightly in front of

you and between your arm span.1

When it sounds like the delay settings are matched up, press  to confirm and continue to the next channel.

•For comparison purposes, the reference speaker will change depending on which speaker you select.

•If you want to go back and adjust a channel, simply use / to select it.

4 When you're finished, press RETURN.

You will return to the Manual MCACC setup menu.

Note

1• If you can’t seem to achieve this by adjusting the distance setting, you may need to change the angle of your speakers very slightly.

•For better audibility, the subwoofer emits a continuous test tone (oscillating pulses are heard from your other speakers). Note that it may be difficult to compare this tone with the other speakers in your setup (depending on the low frequency response of the reference speaker).

38

En