Controls and displays | 04 |
Display
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 |
AUTO | L | C | R | 2DIGITAL 2HD |
PCM | SL | S | SR | DTS WMA9 Pro |
HDMI | AAC DSD PCM | |||
SBL | SB | SBR |
| |
DIGITAL |
| LFE |
|
|
ANALOG |
|
| ||
|
|
| ||
STREAM DIRECT |
|
| ||
2PRO LOGIC Neo :6 |
|
| ||
THX ADV.SURROUND |
|
| ||
STEREO | STANDARD |
|
| |
SP AB | SLEEP |
|
| |
13 14 15 16 17
PHASE CONTROL | DNR | TUNED |
|
STEREO |
| ||
S.RTRV SOUND | MONO | dB | |
|
|
| |
SR+
HDMI [ 1 ] [ 2 ]
18 | 19 |
1 SIGNAL indicators
Light to indicate the currently selected input signal. AUTO lights when the receiver is set to select the input signal automatically (page 29).
2 Program format indicators
These change according to which channels are active in digital sources.
L – Left front channel C – Center channel
R – Right front channel
SL – Left surround channel
S – Surround channel (mono) SR – Right surround channel SBL – Left surround back channel SB – Surround back channel (mono) SBR – Right surround back channel
LFE – Low frequency effects channel (the ((( ))) indicators light when an LFE signal is being input)
3 Digital format indicators
Light when a signal encoded in the corresponding format is detected (DSDPCM lights during the DSD (Direct Stream Digital) to PCM conversion with SACDs).
4 S.RTRV
Lights when the Sound Retriever is switched on (page 31).
5
Lights when the
6 PHASE CONTROL
Lights when the Phase Control is switched on (page 10).
7 Sound processing indicators
Light according to the active AV parameter(s) (page 63). OVER lights to indicate that the level of an analog source is too high. ATT lights when you use the attenuator (ANALOG ATT) to reduce it.
8 V.SB
Lights during Virtual surround back processing (page 30).
9TUNER indicators
TUNED – Lights when a broadcast is being received. STEREO – Lights when a stereo FM broadcast is being received in auto stereo mode.
MONO – Lights when the mono mode is set using the MPX button.
10 SOUND
Lights when any of the Midnight, Loudness or tone controls feature is selected (page 31).
11Master volume level
12SR+
Lights when the SR+ mode is switched on (page 58).
13 STREAM DIRECT
Lights when Direct / Pure Direct is selected (page 28).
14 Speaker indicators
Indicate the current speaker system, A and/or B (page 53).
15Listening mode indicators
THX – Lights when a Home THX mode is selected.
ADV.SURROUND – Lights when an Advanced Surround mode has been selected (page 27).
STEREO – Lights when the stereo mode is selected (page 28).
STANDARD – Lights when a Standard Surround mode is switched on (see Listening in surround sound on page 26).
16SLEEP
Lights when the receiver is in sleep mode (page 65).
17Matrix decoding format indicators
2PRO LOGIC IIx – This lights to indicate 2 Pro Logic II / 2 Pro Logic IIx decoding (page 26).
Neo:6 – When one of the Neo:6 modes of the receiver is on, this lights to indicate Neo:6 processing (page 26).
18Character display
Displays various system information.
19 HDMI connection indicators
Light to indicate the HDMI input currently selected.
23
En
