Panasonic DMCTZ1K, DMC-TS1, DMCTS1S, DMCTS1D, DMCTZ1S Changing the clock setting

Preparation

Press [MENU/SET] to set.

•After completing the clock settings, turn the camera off. Then turn the camera back on, switch to recording mode, and check that the display reflects the settings that were performed.

•When [MENU/SET] has been pressed to complete the settings without the clock having been set, set the clock correctly by following the “Changing the clock setting” procedure below.

Changing the clock setting

Select [CLOCK SET] in the [REC] or [SETUP] menu, and press 1. (P25)

•It can be changed in steps 3 and 4 to set the clock.

•The clock setting is maintained for 3 months using the built-in clock battery even without the battery. (Leave the charged battery in the unit for 24 hours to charge the built-in battery.)

Note

•The clock is displayed when [DISPLAY] is pressed several times during recording.

•You can set the year from 2000 to 2099.

•If the clock is not set, the correct date cannot be printed when you stamp the date on the pictures with [TEXT STAMP] (P102) or order a photo studio to print the pictures.

•If the clock is set, the correct date can be printed even if the date is not displayed on the screen of the camera.

VQT1Z45 23