Panasonic DMCTZ1S Taking Pictures with the Self-timer, Press 2 ë Press 3/4 to select a mode

Advanced (Recording pictures)

[REC] mode: 񷿨

Taking Pictures with the Self-timer

Press 2 [ë].

Press 3/4 to select a mode.

•You can also press 2 [ë] to select.

Press [MENU/SET].

•You can also press the shutter button halfway to finish.

•The menu screen disappears after about 5 seconds. At this time, the selected item is automatically set.

Press the shutter button halfway to focus and then press it fully to take the picture.

•The self-timer indicator A blinks and the shutter is

activated after 10 seconds (or 2 seconds).

• If you press [MENU/SET] while the self-timer is set, the self-timer setting is canceled.

Note

•When using a tripod etc., setting the self-timer to 2 seconds is a convenient way to avoid the jitter caused by pressing the shutter button.

•When you press the shutter button once fully, the subject is automatically focused just before recording. In dark places, the self-timer indicator will blink and then may turn on brightly, operating as an AF assist lamp (P91) to allow the camera to focus on the subject.

•We recommend using a tripod when recording with the self-timer.

•The number of pictures which can be taken in [BURST] is fixed to 3.

•The number of pictures which can be taken in [FLASH BURST] in scene mode is fixed to 5.

•Self-timer cannot be set to 2 seconds in Intelligent Auto Mode.

•Self-timer cannot be set to 10 seconds in [SELF PORTRAIT] in scene mode or Clipboard Mode.

•Setting of the self-timer cannot be performed in the following conditions:

–In [HI-SPEED BURST] and [UNDERWATER] in scene mode

–When recording motion pictures

54 VQT1Z45