VQT1Z45
138
Others
The LCD monitor may flicker for a few seconds after turning the camera on indoors under
fluorescent light. This is not a malfunction.
>Adjust the brightness of the screen. (P27)
[POWER LCD] is activated. (P28)
This is not a malfunction.
These pixels do not affect the recorded pictures.
In dark places, noise may ap pear to maintain the brightness of the LCD monitor. This does not
affect the pictures you are recording.
Is the flash setting set to [Œ]?
>Change the flash setting. (P48)
Flash Mode is not available when auto bracket (P56) or [BURST] (P88) in [REC] mode menu
has been set.
The flash is activated twice when red-eye reduction (P48) has been set.
Has [FLASH BURST] (P64) in scene mode been set?
[ROTATEDISP.] (P106) is set to [ON].
Did you press [(]?
Is there a picture on the built-in memory or the card?
>The pictures on the built-in memory appear when a card is not inserted. The pict ure dat a on
the card appears when a card is inserted.
Is this a picture whose file name has been changed in the PC? If it is, i t c annot be played back
by this unit.
Has [CATEGORY PLAY] or [FAVORITE PLAY] been set for playback?
>Change to [NORMAL PLAY]. (P42)
The LCD monitor flickers indoors.
The LCD monitor is too bright or dark.
Black, red, blue and green dots appear on the LCD monitor.
Noise appears on the LCD monitor.
Flash
The flash is not activated.
Flash is activated several times.
Playback
The picture being played back is rotated and displayed in an unexpected
direction.
The picture is not played back.
The recorded pictures are not displayed.
VQT1Z45~_eng.book 138 ページ 2009年1月28日 水曜日 午後9時30分