VQT1Z45
42
Basic
Note
The digital zoom cannot be set when õ, or ¨ has been selected.
The indicated zoom magnification is an approximation.
“EZ” is an abbreviation of “Extendedoptical Zoom”.
The optical zoom is set to Wide (1k) when the camera is turned on.
If you use the zoom function after focusing on the subject, focus on the subject again.
When using the digital zoom, [STABILIZER] may not be effective.
When using the digital zoom, we recommend using a tripod and the self-timer (P54) for taking
pictures.
The extended optical zoom cannot be used in the following cases:
In Macro Zoom Mode
In [TRANSFORM], [HIGH SENS.], [HI-SPEED BURST], [FLASH BURST], [PIN HOLE] or
[FILM GRAIN] in scene mode
when recording motion pictures
[DIGITALZOOM] cannot be used in the following cases:
In [TRANSFORM], [BABY1]/[BABY2], [PET], [HIGHSENS.], [HI-SPEED BURST],
[FLASH BURST], [PIN HOLE] or [FILMG RAIN] in scene mode
When [INTELLIGENT ISO] is set
[PLAYBACK] Mode: ¸
Playing back Pictures ([NORMAL PLAY])
Speed of picture forwarding/rewinding changes depending on the playback status.
Fast forwarding/Fast rewinding
Press and hold 2/1 during playback.
The file number A and the picture number B only
change one by one. Release 2/1 when the number of
the desired picture appears to play back the picture.
If you keep pressing 2/1, the number of pictures forwarded/rewound increases.
To finish playback
Press [(] again, press the motion picture button or press the shutter button
halfway.

Press [(].

A[(] button
When the mode dial is set to [¨], clipboard will
be displayed. Refer to Viewing clipboard
pictures (P93) for information about playing
back the clipboard.

Press 2/1 to select the picture.

2: Play back the previous picture
1: Play back the next picture
2: Fast rewind
1: Fast forward
A
B
VQT1Z45~_eng.book 42 ページ 2009年1月28日 水曜日 午後9時30分