Panasonic DMC-TS1 Motion pictures cannot be played back on a TV, Viera Link does not work

Others

The display areas on the TV screen and the camera’s LCD monitor are different.

•Depending on the TV model, the pictures may be extended horizontally or vertically or they may be displayed with their edges cut off.

The motion pictures cannot be played back on a TV.

•Are you trying to play back the motion pictures by directly inserting the card in the card slot of the TV?

>Connect the camera to the TV with the AV cable (supplied), or with the HDMI mini cable (optional), and then play back the motion pictures on the camera. (P112, 113)

>Motion pictures recorded in [AVCHD Lite] can be played back on Panasonic televisions (VIERA) with the AVCHD logo.

The picture is not displayed fully on the TV.

>Check [TV ASPECT] setting. (P30)

VIERA Link does not work.

•Is it connected properly with the HDMI mini cable (optional)? (P113)

>Confirm that the HDMI mini-cable (optional) is firmly fitted.

•Is the [VIERA Link] on this unit set to [ON]? (P31)

>Depending on HDMI terminal of the TV, the input channel may not switch automatically. In this case, use the remote control for the TV to switch input. (For details on how to switch input, please read the operating instructions for the TV.)

>Check the VIERA Link setting on the connected device.

>Turn the power to the unit off and then back on again.

>Set [VIERA Link] to [Off] on the TV and then turn it back to [On]. (Refer to the operating instructions of the TV for details.)

The picture cannot be transferred when the camera is connected to a PC.

•Is the camera connected to the PC correctly?

•Is the camera recognized by the PC correctly?

>Set to [PC] in [USB MODE]. (P30, 118)

The card is not recognized by the PC. (The built-in memory is recognized.)

>Disconnect the USB connection cable. Connect it again while the card is inserted in the camera.

•When the mode dial is set to [¨], contents of the built-in memory will be displayed.

>Set the mode dial to anything except [¨].

The picture cannot be printed when the camera is connected to a printer.

•Pictures cannot be printed using a printer which does not support PictBridge.

>Set to [PictBridge(PTP)] in [USB MODE]. (P30, 122)

The ends of the pictures are cut at printing.

>When using a printer with a trimming or borderless printing function, cancel this function before printing. (For details, refer to the operating instructions for the printer.)

>When you order photo studios to print pictures, ask the photo studio if the pictures can be printed with both ends.

140 VQT1Z45