Advanced (Recording pictures)

Start recording by pressing the motion picture button.

AAudio recording

The available recording time B is displayed on the top right and the elapsed recording time C is displayed on the bottom right of the screen.

Release the motion picture button right after you press it. Audio will not be recorded for few second after it starts recording if it is kept pressed.

The audio is also recorded simultaneously from the built-in microphone on this unit. (Motion pictures cannot be recorded without audio.)

The screen will become dark momentarily, and recording will start after adjusting the display.

AB

C

Stop the recording by pressing the motion picture button again.

If the built-in memory or the card becomes full in the middle of recording, the camera stops recording automatically.

Note

The screen will change as follows when the motion picture button is pressed in steps 2 and 3.

AStill picture recording screen

B Motion Picture Mode setting¢1

CMotion picture recording screen

DStill Picture Mode setting

6

AUTO

R124s

3s

¢1 The screen that is displayed during Motion Picture Mode setting is different depending on the setting of the [REC MODE].

It is possible to set from following [MOTION PICTURE] mode menu.

[REC MODE] (P71)/[REC QUALITY] (P71)/[WHITE BALANCE] (P83)/[I.EXPOSURE] (P87)/ [AF MODE]¢2 (P85)/[CONTINUOUS AF] (P73)/[DIGITAL ZOOM] (P88)/[COLOR MODE]¢2 (P89)/[WIND CUT] (P73)/[LED LIGHT] (P74)

¢2 The setting which can be selected are different from still picture [REC] mode menu.

The flash setting is fixed to [Œ].

Refer to P146 for information about the available recording time.

The available recording time displayed on the screen may not decrease regularly.

Depending on the type of the card, the card access indication may appear for a while after recording motion pictures. This is not a malfunction.

When motion pictures recorded with the camera are played back on other equipment, the quality of the picture and sound may deteriorate and it may not be possible to play them back. Also the recording information may not be displayed correctly.

VQT1Z45 69

Page 69
Image 69
Panasonic DMCTZ1S, DMC-TS1, DMCTS1S Start recording by pressing the motion picture button, Flash setting is fixed to Œ