WiFi Protected Setup WPS | Toshiba BDX2700KU manual

Function setup

Customizing the Function Settings

Done 1 2 3 4 5 6 7 8 9 0 q w e r t y u i o p a s d f g h j k l ; z x c v b n m , . / Space ` - = \ [ ] '

5.Use / / / to highlight Done on the upper-right corner of the keyboard, and press OK to remove the keyboard from the screen.

6.Use to highlight Connect, and press OK. If the

wireless network is functioning, icon and a message “Connection to XXX...Success” will appear on the TV.

7.Press OK to close the message. The BD player is now connected to the network. From now on, when you turn on the player, it will automatically connect to the network; there is no need to repeat these steps again.

Notes:

•If you do not see this message, the BD player was not able to connect to the network.

•If the wireless network is encrypted using an unsupported encryption (it appears in the network list with an icon), you cannot connect to the network. You must change the router’s encryption type before proceeding.

3.Press the WPS button on the top of your router.

4.Once you see “Success” on the button at the bottom of the screen, the BD player is connected to the router.

Note: If you do not see this message, the BD player was not able to connect to the network. Repeat steps 1-4 again.

b.If the BD player is connected to a Wireless Network Using WPS PIN:

2.Press / to select Network List, then press OK. A list of existing wireless networks near the BD player will appear (It may take several seconds for this list to be created). For example: